QLF-WRG210-212
QLF-WRG210
1997 – 2006 Jeep Wranglers are not known for their expansive interior. This makes adding a subwoofer system difficult. The experts at Q Logic make it easy for you. The QLF-WRG210 is a dual 10” sealed enclosure that fits in the rear storage area. The enclosure slides past any obstructions in the tail gate for easy mounting and is locked in place once the gate is closed. The top height of the enclosure matches the top of the rear shock tower area so covers and other aftermarket accessories will still fit.
1997 - 2006 Jeep Wrangler (WRG210) Holds 2-10" Woofers
The enclosure utilizes boundary loading by firing the woofers into the tail gate of the Jeep. Boundary loading increases the output and extends the lowest frequencies which greatly enhance the performance of your subwoofers. Through careful testing, we determine the exact distance necessary to separate the woofers from the rear wall to achieve the maximum results. Careful enclosure design and precise manufacturing allow for maximum mounting depth and air volume while not affecting interior passenger room or comfort.
Installation is easy. Install your woofers using the specially designed MDF screws provided with your enclosure, run speaker leads from your amplifier to the terminal cups, slide the custom-fit enclosure behind the seat and you are done. It is important to leave approximately 6” of “slack” in your speaker leads so the cabinet can be slid slightly out the rear when tumbling your rear seats forward. Q Logic makes adding bass easy.
QLF-WRG212
1997 – 2006 Jeep Wranglers are not known for their expansive interior. This makes adding a subwoofer system difficult. The experts at Q Logic make it easy for you. The QLF-WRG212 is a dual 12” sealed enclosure that fits in the rear storage area. The enclosure slides past any obstructions in the tail gate for easy mounting and is locked in place once the gate is closed. The top height of the enclosure is just under the sheet metal “roll” of the rear cargo area.
1997 - 2006 Jeep Wrangler (WRG212) Holds 2 - 12" Woofers
The enclosure utilizes boundary loading by firing the woofers into the tail gate of the Jeep. Boundary loading increases the output and extends the lowest frequencies which greatly enhance the performance of your subwoofers. Through careful testing, we determine the exact distance necessary to separate the woofers from the rear wall to achieve the maximum results. Careful enclosure design and precise manufacturing allow for maximum mounting depth and air volume while not affecting interior passenger room or comfort.
Installation is easy. Install your woofers using the specially designed MDF screws provided with your enclosure, run speaker leads from your amplifier to the terminal cups, slide the custom-fit enclosure behind the seat and you are done. It is important to leave approximately 6” of “slack” in your speaker leads so the cabinet can be slid slightly out the rear when tumbling your rear seats forward. Q Logic makes adding bass easy.
