QL-K1002 OEM Kick Panel Removal Instructions
QL-K1002 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Camaro/Z28; Firebird/Trans Am (1982–1992)
OEM term: Kick panel Source grade: E
- Identify the factory Kick panel and any sill plate, footrest, hood-release handle, or adjacent trim that overlaps it.
- Remove visible screws, nuts, push pins, or clips only after confirming their locations in the linked reference.
- Use a plastic trim tool close to each retainer and pull the panel free without forcing it.
- If the panel resists, stop and verify the exact model-year procedure before continuing.
Reference: ThirdGen.org interior panel removal discussion. An exact publicly accessible factory trim-removal page has not yet been located. Use the linked manual/archive and visually confirm every fastener or clip before applying force.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
