QL-K1005 OEM Kick Panel Removal Instructions
QL-K1005 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Camaro/Z28; Firebird/Trans Am (1993–2002)
OEM term: Kick panel / instrument-panel side trim Source grade: C
- Identify the factory Kick panel / instrument-panel side trim and any sill plate, footrest, hood-release handle, or adjacent trim that overlaps it.
- Remove visible screws, nuts, push pins, or clips only after confirming their locations in the linked reference.
- Use a plastic trim tool close to each retainer and pull the panel free without forcing it.
- If the panel resists, stop and verify the exact model-year procedure before continuing.
Q-Forms note: Factory kick panel must be cut to join with Q-Form.
Reference: 1998–2002 Camaro upper-dash replacement procedure. OEM parts documentation confirms the panel terminology and retention layout. Use the linked reference to verify the exact fastener locations for your vehicle.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
