QL-K1007 OEM Kick Panel Removal Instructions

QL-K1007 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.

Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.

Tahoe/Yukon/Suburban/C/K/Sierra/Escalade (1995–2000)

OEM term: Body hinge pillar trim panel   Source grade: A

  1. Locate and remove the trim-panel retaining screw.
  2. Starting at an accessible edge, pull the panel outward carefully to release the factory retainers.
  3. Remove the panel from the footwell without twisting the retained edges.

Q-Forms note: 1.5-in parking-brake bend.

Reference: 1999 Chevrolet Tahoe body hinge pillar trim panel replacement. This procedure is based on an exact factory-service procedure or manufacturer workshop source.

Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.

Home / QL-K1007 OEM Kick Panel Removal Instructions