QL-K1012 OEM Kick Panel Removal Instructions
QL-K1012 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Silverado/Sierra/Tahoe/Yukon/Suburban/Avalanche/Escalade (1999–2007 Classic)
OEM term: Cowl trim / body front hinge pillar trim Source grade: C
- Identify the factory Cowl trim / body front hinge pillar trim and any sill plate, footrest, hood-release handle, or adjacent trim that overlaps it.
- Remove visible screws, nuts, push pins, or clips only after confirming their locations in the linked reference.
- Use a plastic trim tool close to each retainer and pull the panel free without forcing it.
- If the panel resists, stop and verify the exact model-year procedure before continuing.
Reference: 2005 Silverado interior trim – cab. OEM parts documentation confirms the panel terminology and retention layout. Use the linked reference to verify the exact fastener locations for your vehicle.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
