QL-K1015 OEM Kick Panel Removal Instructions

QL-K1015 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.

Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.

H2/H2 SUT (2003–2007)

OEM term: Body hinge pillar trim panel   Source grade: A

  1. Remove the adjacent close-out panel to expose the hinge-pillar trim fastener.
  2. Remove the retaining screw.
  3. Pull the hinge-pillar trim outward gently to release the clips.
  4. If equipped with a lower courtesy lamp, disconnect its electrical connector before fully removing the panel.

Reference: 2004 Hummer H2 body hinge pillar trim panel replacement. This procedure is based on an exact factory-service procedure or manufacturer workshop source.

Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.

Home / QL-K1015 OEM Kick Panel Removal Instructions