QL-K1201 OEM Kick Panel Removal Instructions
QL-K1201 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Volkswagen Golf/Jetta (1994–1998)
OEM term: Sill panel trim / lower A-pillar-footwell trim Source grade: B
- VW workshop manual gives sill-panel removal: remove two-piece securing clip/press-button fasteners, push down/detach lower edge, then pull trim from clips. Use with adjacent lower A-pillar/footwell trim steps.
- Work the panel free with a plastic trim tool, supporting the panel close to each retainer.
- Stop if the panel does not release normally and re-check the linked factory source for hidden fasteners or trim-option differences.
Q-Forms note: Relocate passenger harness and hood release.
Reference: Volkswagen Golf Mk3 sill panel trim removal. This procedure is based on factory workshop/service information for this vehicle family. Verify the exact model-year fastener locations before forcing any trim.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
