QL-K2010 OEM Kick Panel Removal Instructions
QL-K2010 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Ford F150/F250 (1997–2004 Heritage)
OEM term: Cowl side trim panel Source grade: A
- Remove the right-hand door scuff/sill plate.
- Remove the pin-type retainer or clip securing the Cowl side trim panel.
- Pull the cowl/kick panel away from its remaining retainers and remove it.
Q-Forms note: Adjustable pedals may add installation time.
Reference: 2002 Ford F150 SuperCrew ECM service procedure. This procedure is based on an exact factory-service procedure or manufacturer workshop source.
Ford Expedition/Lincoln Navigator (1997–2002)
OEM term: Cowl side trim panel Source grade: C
- Identify the factory Cowl side trim panel and any sill plate, footrest, hood-release handle, or adjacent trim that overlaps it.
- Remove visible screws, nuts, push pins, or clips only after confirming their locations in the linked reference.
- Use a plastic trim tool close to each retainer and pull the panel free without forcing it.
- If the panel resists, stop and verify the exact model-year procedure before continuing.
Reference: 2001 Ford Expedition cowl-side trim parts reference. OEM parts documentation confirms the panel terminology and retention layout. Use the linked reference to verify the exact fastener locations for your vehicle.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
