QL-K2013 OEM Kick Panel Removal Instructions
QL-K2013 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Ford F150/Lincoln Mark LT (2004–2008)
OEM term: Cowl/A-pillar side trim Source grade: B
- Factory procedures for this interior family remove side/cowl trim as part of instrument-panel service. Use 2004–08-specific page rather than 2009.
- Work the panel free with a plastic trim tool, supporting the panel close to each retainer.
- Stop if the panel does not release normally and re-check the linked factory source for hidden fasteners or trim-option differences.
Reference: Ford service manual family reference. This procedure is based on factory workshop/service information for this vehicle family. Verify the exact model-year fastener locations before forcing any trim.
Ford F150 (2009)
OEM term: A-pillar/cowl side trim Source grade: A
- 2009 factory instrument-panel procedure explicitly includes front scuff and A-pillar/cowl-side trim steps.
- Work the panel free with a plastic trim tool, supporting the panel close to each retainer.
- Stop if the panel does not release normally and re-check the linked factory source for hidden fasteners or trim-option differences.
Reference: 2009 Ford F150 instrument-panel service procedure. This procedure is based on an exact factory-service procedure or manufacturer workshop source.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
