QL-K3002 OEM Kick Panel Removal Instructions
QL-K3002 — factory kick/cowl-side trim removal guide for the Q-Logic fitments listed below.
Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.
Jeep Cherokee (1984–1996)
OEM term: Cowl side trim Source grade: B
- Public exact removal leaf for 1984–96 was not surfaced; use XJ factory manual body/interior section and verify screw/retainer layout.
- Work the panel free with a plastic trim tool, supporting the panel close to each retainer.
- Stop if the panel does not release normally and re-check the linked factory source for hidden fasteners or trim-option differences.
Q-Forms note: Close to clutch on manual vehicles.
Reference: Jeep factory-service-manual archive. This procedure is based on factory workshop/service information for this vehicle family. Verify the exact model-year fastener locations before forcing any trim.
Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.
