QL-K3004 OEM Kick Panel Removal Instructions

QL-K3004 — OEM kick/cowl-side trim removal guide for the listed Q-Forms applications.

Safety: Ignition off/key removed. Follow the vehicle manufacturer's battery/SRS precautions. Use plastic trim tools and do not force a panel that resists.

1995–1999 Eclipse/Talon; Sebring/Avenger coupe

OEM term: Kick panel / cowl-side trim   Source grade: E

  1. Remove the front door-sill/scuff trim where it overlaps the lower cowl trim.
  2. Locate and remove any visible screw or push retainer securing the kick/cowl trim.
  3. Release the remaining clips with a plastic trim tool and remove the panel from the footwell.
  4. On vehicles with a factory footrest, remove it as required for Q-Forms fitment.

Q-Forms note: Convertible models are excluded; use of the factory footrest is lost.

Reference: Mitsubishi service-manual archive. Exact fastener layouts can vary by DSM/Chrysler derivative and model year; verify before forcing trim.

Manufacturer service information controls if it differs from this summary. Fasteners and trim details can vary by year/options.

Home / QL-K3004 OEM Kick Panel Removal Instructions